The Allen-Bradley VPL-B1002E-PK12AA servo motor is a 400 Volts unit manufactured inside a 100-millimeter frame. It comes with a smooth shaft and it adapts to the manufacturing plant it is installed in by using a single SpeedTEC connector. The speed rating of this servo motor with a normal load is 3500 RPM. No holding brake is available in the motor. The motor uses 2 magnetic stacks and it is equipped with a multi-turn encoder. The motor should be protected from electrical noise. The noise can affect the performance of the motor. The effects of the noise can be reduced by using shielded cables and by isolating the power transformers on all the AC input power lines. All the equipment should be grounded by using a single-point parallel-ground system using larger straps. The VPL-B1002E-PK12AA servo motor is equipped with a Hiperface DSL functional sensor. While installing the motor, enough space should be left so that the motor can dissipate the heat and remain within the proper temperature range. The temperature range for normal operation is between 0 and 40 degrees Celsius. The storage temperature range of the motor lies in between -30 and 40 degrees Celsius. The torque rating of this servo motor variant is 3.39 N-m.

The Allen-Bradley VPL-B1002E-PK12AA servo motor uses a multi-turn digital encoder as a feedback device. It provides performance information to the control system by using serial communication. This encoder uses up to 4096 turns to provides absolute position feedback. The servo motor can also be mounted by using an IEC metric mounting base with free mounting holes. The servo motor is designed to be rugged and its body is built with a stainless steel shaft and fasteners. The VPL-B1002E-PK12AA servo motor can be operated at an altitude of up to 1000 meters above sea level without being derated. The airflow should not be obstructed between the ventilation source and the motor in order to maintain the proper operating temperature range.