The 1606-XLS480EE power supply comes from the XLS performance series manufactured by Allen-Bradley. The device is certified with the CE, CSA, C-Tick, GOST, and other standards. It requires 200 to 240 Volts AC input for normal operation. The output power rating of the device is 480 Watts. The device has superior reserve power and it can support 150% of the rated power for more than 5 seconds. The device supports DC-OK signals and it comes with the overload LED. The 1606-XLS480EE power supply supports a wide range of AC/DC input and it has an active power factor correction feature. The device has a high level of efficiency. The power supply has an intelligent circuit design and it includes long-lived electrolytic capacitors. The device has the ability to allow for a 50% additional power reserve without minimizing the ripple and noise. The device can be used with 220 to 240 Volts AC rated non-public mains only.

The 1606-XLS480EE power supply has a short term power capacity of 150% and built-in output capacitors which help to start the motor, a charging capacitor, and reserve energy. The device features unique quick-connect spring clamp terminals which help to achieve fast and safe installation processes. The device has a power factor of 0.5 and a crest factor of 4.2 at 24 Volts and 20 Amps of current. The output voltage of the device is adjustable. It can be adjusted between 24 and 28 Volts minimum and 30 Volts maximum. The 1606-XLS480EE has the ability to support a load with higher than short-term power requirement without getting damaged or shut down. The short-term duration is controlled by hardware and by using an output power manager. The DC-OK relay contact in the device monitors the output voltage which is generated from the power supply. It helps the output voltage reach the nominal level. If this level is not achieved, the overload LED will be on and the DC-OK contact will be open.