Welcome to Dongguan Gexu Automation Equipment Co., Ltd

ALL CATEGORIES

TSXSCP114 - PCMCIA Communication Card, RS485, Modbus / Uni-Telway

Product type: PCMCIA communication card  |  Range: Modicon Premium  |  Slot: PCMCIA Type III  |  Interface: RS485  |  Protocol: Serial Modbus, character mode, Uni-Telway  |  Supply: 5 V DC, 150 mA from host slot

The TSXSCP114 is a PCMCIA communication card for the Modicon Premium automation platform. It is a communication accessory, not a standalone device: it slides into a Type III PCMCIA slot on a Premium processor or an Atrium coprocessor, or into the TSXSCY21601 carrier module fitted to a TSX 37-21/22 controller, and gives that host a serial RS485 link. There is no field wiring on the card itself; the connection is made through the host or through the carrier module that holds it.

There is one physical interface, RS485, and three protocols available on it: serial Modbus, character mode (free ASCII framing) and Uni-Telway. Because the card has a single port, only one protocol runs at a time, and the choice is made in the PLC configuration rather than by a switch on the card. This is what the card is for: putting a Premium or Micro controller onto a Modbus segment of drives, meters and remote I/O, or onto an existing Uni-Telway bus of legacy Telemecanique devices.

The format is PCMCIA Type III, the 10.5 mm thick variant on an 85.6 x 54 mm footprint. Check the slot before ordering, because a Type II slot will not accept it. The hosts named by Schneider Electric for this reference are Premium processors, Atrium coprocessors, the TSX 37-21/22 and the TSXSCY21601. The TSXSCY21601 is the carrier that adds a PCMCIA slot to controllers that do not have one built in, so the card and the carrier are often ordered together.

Power comes from the host slot: 5 V DC at 150 mA. The card has no external supply terminal and nothing on it is wired to 24 V DC or 230 V AC, so a dead link is never a card supply problem - it is the host, the slot or the RS485 wiring that has to be checked. The card carries no I/O of its own; all discrete and analog points stay on the controller and its I/O modules.

Two ordering points are worth stating plainly. First, this is a serial card and does not provide Ethernet, despite sharing the PCMCIA form factor with network cards of the same family. Second, it is not a memory card: the Type III slot is used here for communication, and the memory type field refers only to the physical format. When replacing a card in a running installation, keep the protocol, the station address and the baud rate identical to the failed unit, otherwise the host will come up without a link. Net weight is 0.105 kg; one piece is packed in a 170 x 155 x 35 mm carton of 0.181 kg.

Specifications

Characteristic Value
Range of product Modicon Premium automation platform
Accessory / separate part category Communication accessory
Accessory / separate part type PCMCIA card
Memory type PCMCIA card Type III
Product compatibility TSX 37-21/22, TSXSCY21601
Accessory / separate part designation Atrium coprocessor, Premium processor
Physical interface RS485
Communication port protocol Serial Modbus, character mode, Uni-Telway
Current consumption 150 mA at 5 V DC
Country of origin France
Net weight 0.105 kg
Packing unit weight 0.181 kg
Packing unit dimensions 170 x 155 x 35 mm
Warranty 18 months
Translation missing: en.general.search.loading