Welcome to Dongguan Gexu Automation Equipment Co., Ltd

ALL CATEGORIES

TSXDSY16T2 - Discrete Output Module, 16 Solid State Outputs, 24 V DC, 0.5 A

Product type: Discrete Output Module  |  Range: Modicon Premium  |  Outputs: 16 solid state, positive logic  |  Output current: 0.5 A per channel  |  Connection: screw terminal block

The TSXDSY16T2 is a 16-channel discrete output module of the Modicon Premium automation platform. It is a standard format module and occupies one slot in the rack. All 16 outputs are solid state (transistor) outputs with positive logic, so the module sources current to the load. It is built to drive 24 V DC loads directly: relay coils, solenoid valves, indicator lamps and small DC contactors. Because the outputs are solid state and not relay contacts, the module switches DC loads only and cannot be used on an AC circuit.

The output voltage is 24 V DC positive, conforming to EN/IEC 61131-2 over a range of 19 to 30 V. Rated output current is 0.5 A, the maximum current per channel is 0.625 A, and the maximum current per module is 7 A. Response time is 1.2 ms and the switching frequency is 0.5/LI² Hz. At state 0 the maximum leakage current is 0.5 mA and the residual voltage is 1.2 V. The preactuator voltage detection threshold is 16 V and the minimum load impedance is 48 Ohm, which corresponds to 24 V at 0.5 A.

Each output is protected on the module itself, which is the main difference from the relay version TSXDSY16R5. Overvoltage on the output is clamped by a transil diode, reverse polarity is handled by a reverse mounted diode, and overload and short circuit are cleared by electronic tripping on reactivation, with no external fuse required. Inductive DC loads should still be fitted with a freewheeling diode across the coil to limit the energy the transil has to absorb.

Field wiring uses a 16-channel screw terminal block. The module takes its logic supply from the rack and draws 80 mA at 5 V DC; the load side needs a separate 24 V DC supply. Power dissipation is calculated as 1.1 W plus 0.75 W multiplied by the number of outputs in state 1 and the current per module. Insulation resistance is above 10 MOhm at 500 V and dielectric strength is 1500 V at 50/60 Hz for 60 seconds.

Operating temperature is 0 to 60 °C and storage temperature −25 to 70 °C. Relative humidity is 10 to 95 % without condensation in operation and 5 to 95 % in storage, operating altitude is up to 2000 m, protection degree is IP20, pollution degree is 2 and the protective treatment is TC. The module is marked CE and conforms to 73/23/EEC, 92/31/EEC, 89/336/EEC and IEC 61131-2, with UL 508, CSA C22.2 No 142 and CSA C22.2 No 213 Class I Division 2 groups A, B, C and D. Marine certifications are BV, RINA, LR, ABS, RMRS, GL and DNV. Net weight is 0.34 kg; one piece is packed in a 26 x 18 x 5.5 cm carton of 453 g.

Specifications

Characteristic Value
Range of product Modicon Premium automation platform
Product or component type Discrete output module
Discrete output number 16
Discrete output type Solid state protected
Output logic Positive (sourcing)
Discrete output voltage 24 V DC positive (EN/IEC 61131-2: 19...30 V)
Discrete output current 0.5 A
Current per channel 0.625 A maximum
Maximum current per module 7 A
Response time 1.2 ms
Switching frequency 0.5/LI² Hz
Maximum leakage current 0.5 mA at state 0
Residual voltage [Ures] 1.2 V
Preactuator voltage detection threshold 16 V
Minimum load impedance 48 Ohm
Output overvoltage protection By transil diode
Reverse polarity protection Reverse mounted diode
Output overload protection Electronic tripping on reactivation
Short-circuit protection Electronic tripping on reactivation
Insulation resistance > 10 MOhm at 500 V
Dielectric strength 1500 V, 50/60 Hz, 60 s
Electrical connection Screw terminal block, 16 channels
Current consumption 80 mA at 5 V DC (rack)
Power dissipation 1.1 W + 0.75 W x number of outputs x current per module
Module format Standard
Net weight 0.34 kg
IP degree of protection IP20
Pollution degree 2
Protective treatment TC
Ambient air temperature for operation 0...60 °C
Ambient air temperature for storage −25...70 °C
Relative humidity 10...95 % without condensation (operation); 5...95 % without condensation (storage)
Operating altitude Up to 2000 m
Marking CE
Standards 73/23/EEC, 92/31/EEC, 89/336/EEC, IEC 61131-2, UL 508, CSA C22.2 No 142, CSA C22.2 No 213 Class I Division 2 groups A/B/C/D
Product certifications BV, RINA, LR, ABS, RMRS, GL, DNV
Packing unit weight 453 g
Packing unit dimensions 26 x 18 x 5.5 cm
Translation missing: en.general.search.loading