Welcome to Dongguan Gexu Automation Equipment Co., Ltd

ALL CATEGORIES

TSXDMZ28DR - Discrete Relay I/O Base, 16 Inputs 24 V DC, 12 Relay Outputs

Product type: Discrete relay I/O base  |  Range: Modicon TSX Micro  |  Points: 28 total, 16 DI + 12 relay DO  |  Input: 24 V DC, negative logic, 9 mA  |  Output: 12 NO relay, Ith 3 A, 19...264 V AC / 10...34 V DC  |  Isolation: 1500 V

The TSXDMZ28DR is a discrete relay I/O base for the Modicon TSX Micro automation platform. It carries 28 points in one housing: 16 discrete inputs at 24 V DC and 12 normally open relay outputs. Inputs are brought in on screw terminal blocks, which is what makes this unit practical in a panel where field wiring is landed directly rather than through a pre-crimped connector. It seats on the TSX Micro base assembly and takes its supply from the internal I/O bus, so it is an expansion base rather than a standalone device and is not used on its own.

The 16 inputs are 24 V DC with negative logic and draw 9 mA per point. Guaranteed states are 1.5 mA or less for logic 0 and 2.5 mA or more for logic 1, response time is 0.1 to 7.5 ms, and the inputs accept 2-wire and 3-wire proximity sensors. The input logic matters at the ordering stage: negative logic is not interchangeable with the positive logic variant of the same platform, and the sensor type has to match it, so confirm the sink/source direction of the existing sensors before connecting. The module is declared to IEC 1131-2 type 1.

The 12 outputs are normally open relay contacts, rated 3 A conventional thermal current Ith. Because they are contacts and not semiconductors, the same output switches 19 to 264 V AC or 10 to 34 V DC, with a switching capacity of 50 VA at 24 V AC, 110 VA at 48 V AC, 220 VA at 110 V AC and 220 V AC on resistive loads, and 40 W at 24 V DC resistive or 24 W at 24 V DC inductive. That is the reason to pick the DR version over a solid state output: it can drive an AC coil, a small contactor or a lamp directly, without an interposing relay. Response time is under 10 ms and isolation between the field side and the bus is 1500 V for 1 second.

Supply comes from the TSX Micro internal I/O bus: 160 mA in positive logic or 131 mA in negative logic, with 4.5 W of dissipation. There is no separate 24 V terminal for the module electronics, though the relay contacts are dry and need the load circuit wired through the front terminals. Mounting is on 35 mm DIN rail or on a panel, and the unit is IP20, so it belongs inside an enclosure. Power dissipation of 4.5 W is low enough that no forced ventilation is needed in a normal cabinet.

Two things are worth checking before ordering. First, this is the relay version: the TSXDMZ28DT carries the same 28 points with solid state outputs, and the two are not interchangeable where a DC load needs fast switching or a long service life at high cycle rates. Second, 28 points is the total of 16 inputs plus 12 outputs - a buyer who needs 20 inputs will not get them here, and should look at a different base or a separate input module. The unit carries 18 months warranty. Net weight is 0.5 kg; one piece is packed in a 260 x 180 x 55 mm carton of 0.582 kg.

Specifications

Characteristic Value
Range of product Modicon TSX Micro automation platform
Product or component type Discrete relay I/O base
Total I/O points 28 (16 discrete inputs + 12 relay outputs)
Discrete input number 16, screw terminal block
Discrete input voltage 24 V DC, negative logic
Discrete input current 9 mA
Guaranteed state current ≤ 1.5 mA at state 0, ≥ 2.5 mA at state 1
Input compatibility 2-wire / 3-wire proximity sensors
Response time 0.1...7.5 ms input, < 10 ms output
Number of relay outputs 12, normally open (NO)
Output voltage limits 19...264 V AC, 10...34 V DC
Conventional thermal current (Ith) 3 A
Load type Resistive
Switching capacity 50 VA at 24 V AC, 110 VA at 48 V AC, 220 VA at 110 / 220 V AC; 40 W at 24 V DC-12, 24 W at 24 V DC-13
Isolation voltage 1500 V for 1 s
Current consumption 160 mA positive logic, 131 mA negative logic
Power dissipation 4.5 W
Standards IEC 1131-2 type 1
Degree of protection IP20
Mounting 35 mm DIN rail or panel
Net weight 0.5 kg
Packing unit weight 0.582 kg
Packing unit dimensions 260 x 180 x 55 mm
Warranty 18 months
Translation missing: en.general.search.loading