The TM5SDO4R is a digital output module for the Modicon TM5 system, and in the Schneider Electric data it is listed for the PacDrive LMC motion controllers (LMC Pro, LMC Pro 2 and LMC Eco). It carries four relay outputs in a 12.5 mm wide slice, each one a changeover contact rather than a simple normally open contact. Like every TM5 slice it is part of an assembly: it sits on a bus base with a terminal block, takes its supply from the TM5 bus and does not run on its own, so the bus base and terminal block are ordered alongside the module rather than being included in it.
The four outputs are relay contacts, rated 5 A per channel with a maximum of 10 A per output common. Each is a C/O contact, which means both a normally open and a normally closed path are available per point - useful for reversing duty, two-position actuators, or for keeping a signal closed when the coil is de-energised. Because they are contacts, the same output switches either 230 V AC from 184 to 276 V or 30 V DC from 24 to 36 V. That dual rating is the practical reason to choose this module: one part covers AC valves, lamps and small contactor coils as well as DC solenoids, without adding an interposing relay or a second module type.
Life figures are the trade-off that comes with a relay output and should be checked against the duty cycle. Mechanical life is 20,000,000 operations, and electrical life is 500,000 operations at 5 A. A machine that cycles an output once every few seconds stays within that; an application that switches at high frequency over years does not, and belongs on the transistor version of the same platform instead. For the intended duty - valve and contactor control, indicator and interlock circuits - the relay contact is the more forgiving choice, because it is polarity-independent, provides galvanic separation between the load and the module, and does not need a freewheel diode on a DC coil.
Wiring is plug-in: the terminals are on a removable terminal block, so a slice can be swapped without unwiring the field cables. The module is 99 mm high, 12.5 mm wide and 75 mm deep, which is one slot in a TM5 assembly, and it is IP20, so it belongs inside an enclosure on a DIN rail. Power dissipation is 2.3 W, with 160 mA drawn typically at 5 V DC from the bus. Heat is low enough that no forced ventilation is needed in a normal cabinet, but the 12.5 mm width means slices are packed tightly, so keep the derating rule in mind when several output slices sit side by side: rated ambient is -10 to 55 °C without derating for vertical mounting.
Electromagnetic and environmental ratings match the rest of the platform: 4 kV contact and 8 kV air discharge to IEC 61000-4-2, 10 V/m from 80 to 2000 MHz to IEC 61000-4-3, vibration 1 gn from 8.4 to 150 Hz and 3.5 mm from 5 to 8.4 Hz, shock 15 gn for 11 ms, pollution degree 2, operating altitude up to 2000 m, and 5 to 95 % relative humidity without condensation. The module is CE marked and certified CSA, CULus, GOST-R and C-Tick, and is declared to UL 508, IEC 61131-2, CSA C22.2 No 213 and CSA C22.2 No 142. Storage temperature is -40 to 70 °C. Net weight is 0.025 kg; one piece is packed in a 105 x 60 x 20 mm carton of 0.045 kg. Country of origin: Austria.
| Characteristic | Value |
|---|---|
| Range of product | Modicon TM5 |
| Product or component type | Digital output module |
| Product specific application | PacDrive LMC Pro 2, PacDrive LMC Eco, PacDrive LMC Pro |
| Number of outputs | 4, relay, C/O (changeover) |
| Output voltage | 230 V AC (184...276 V), 30 V DC (24...36 V), relay |
| Current per channel | 5 A |
| Maximum current per output common | 10 A |
| Mechanical life | 20,000,000 operations |
| Electrical life | 500,000 operations at 5 A |
| Electrical connection | Plug-in terminal block |
| Typical current consumption | 160 mA at 5 V DC |
| Power dissipation | 2.3 W |
| Dimensions (H x W x D) | 99 x 12.5 x 75 mm |
| Degree of protection | IP20 |
| Marking | CE |
| Product certifications | CSA, CULus, GOST-R, C-Tick |
| Standards | UL 508, IEC 61131-2, CSA C22.2 No 213, CSA C22.2 No 142 |
| Ambient air temperature for operation | −10...55 °C without derating (vertical mounting) |
| Ambient air temperature for storage | −40...70 °C |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...2000 m |
| Pollution degree | 2 |
| Resistance to electrostatic discharge | 4 kV contact, 8 kV air, IEC 61000-4-2 |
| Resistance to electromagnetic fields | 10 V/m, 80...2000 MHz, IEC 61000-4-3 |
| Vibration resistance | 1 gn, 8.4...150 Hz; 3.5 mm, 5...8.4 Hz |
| Shock resistance | 15 gn for 11 ms |
| Country of origin | Austria |
| Net weight | 0.025 kg |
| Packing unit weight | 0.045 kg |
| Packing unit dimensions | 105 x 60 x 20 mm |
| Warranty | 18 months |