The TM5SDI4D is a digital input module for the Modicon TM5 system. Schneider Electric lists it for the Modicon M258 and LMC058 logic controllers and for the PacDrive LMC motion controllers (LMC Pro, LMC Pro 2 and LMC Eco). It provides four 24 V DC inputs in a 12.5 mm wide slice. Like every TM5 slice it is a component of an assembly rather than a standalone device: it mounts on a TM5 bus base with a removable terminal block, takes its supply from the bus, and is ordered alongside the base and terminal block rather than with them included.
The four inputs are 24 V DC with a permitted range of 20.4 to 28.8 V, and the logic is sink, which in Schneider Electric terminology is the negative logic input. This is the first thing to check against the installation: a sink input has to be driven by a sourcing output, so the sensor or switch feeding it must be of the sourcing type, and a sensor of the opposite type will not switch the point even though the wiring looks correct. Each input draws 3.75 mA at 24 V DC with an input impedance of 6.4 kOhm. The guaranteed state thresholds are 15 V or more for state 1 and 5 V or less for state 0, which leaves a wide margin against voltage drop on long sensor cables.
The declared electrical connection is 3-wire, meaning each sensor is wired with its own supply, signal and reference rather than being looped through a common potential. The module carries a sensor supply of its own with a voltage drop below 2 V at 500 mA, so three-wire sensors can be fed from the module instead of from a separate 24 V source. Input filtering is set at 25 ms or less in software and 100 ms or less in hardware; the software setting is the one used to reject contact bounce or short pulses on a machine, and it should be chosen against the scan time the application can accept. Four green LEDs on the front show input state one to one, which makes a stuck sensor visible without a terminal.
Supply comes from the TM5 bus: 28 mA at 5 V DC plus 25 mA at 24 V DC, with 0.73 W of dissipation. The slice is 99 mm high, 12.5 mm wide and 75 mm deep and is IP20, so it belongs inside an enclosure on a DIN rail. Because the width is only 12.5 mm, slices sit tightly side by side; the rated ambient of -10 to 55 °C applies without derating for vertical mounting, and the derating rule has to be observed when a group of slices is packed together in a cabinet without forced ventilation.
The environmental and electromagnetic ratings match the rest of the platform: 4 kV contact and 8 kV air discharge to IEC 61000-4-2, 10 V/m from 80 to 2000 MHz and 1 V/m from 2 to 2.7 GHz to IEC 61000-4-3, vibration 1 gn from 8.4 to 150 Hz and 3.5 mm from 5 to 8.4 Hz, shock 15 gn for 11 ms, pollution degree 2, operating altitude up to 2000 m and 5 to 95 % relative humidity without condensation. The module is CE marked and certified CSA, CULus, GOST-R and C-Tick, and is declared to UL 508, IEC 61131-2, CSA C22.2 No 213 and CSA C22.2 No 142. Storage temperature is -40 to 70 °C. Net weight is 0.025 kg; one piece is packed in a 105 x 60 x 20 mm carton of 0.037 kg. Country of origin: Austria.
| Characteristic | Value |
|---|---|
| Range of product | Modicon TM5 |
| Product or component type | Digital input module |
| Product specific application | Modicon M258, Modicon LMC058, PacDrive LMC Pro, LMC Pro 2, LMC Eco |
| Number of inputs | 4 |
| Input voltage | 24 V DC (limits 20.4...28.8 V) |
| Input logic | Sink (negative logic) |
| Input current | 3.75 mA at 24 V DC |
| Input impedance | 6.4 kOhm |
| Guaranteed state 1 voltage | ≥ 15 V |
| Guaranteed state 0 voltage | ≤ 5 V |
| Input filtering | ≤ 25 ms configurable in software, ≤ 100 ms hardware |
| Sensor supply | Voltage drop < 2 V at 500 mA |
| Electrical connection | 3-wire |
| Current consumption | 28 mA at 5 V DC, 25 mA at 24 V DC |
| Power dissipation | 0.73 W |
| Local signalling | 1 green LED power on, 1 red LED power fault, 4 green LEDs input status |
| Dimensions (H x W x D) | 99 x 12.5 x 75 mm |
| Degree of protection | IP20 |
| Marking | CE |
| Product certifications | CSA, CULus, GOST-R, C-Tick |
| Standards | UL 508, IEC 61131-2, CSA C22.2 No 213, CSA C22.2 No 142 |
| Ambient air temperature for operation | −10...55 °C without derating (vertical mounting) |
| Ambient air temperature for storage | −40...70 °C |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...2000 m |
| Pollution degree | 2 |
| Resistance to electrostatic discharge | 4 kV contact, 8 kV air, IEC 61000-4-2 |
| Resistance to electromagnetic fields | 10 V/m, 80...2000 MHz; 1 V/m, 2...2.7 GHz, IEC 61000-4-3 |
| Vibration resistance | 1 gn, 8.4...150 Hz; 3.5 mm, 5...8.4 Hz |
| Shock resistance | 15 gn for 11 ms |
| Country of origin | Austria |
| Net weight | 0.025 kg |
| Packing unit weight | 0.037 kg |
| Packing unit dimensions | 105 x 60 x 20 mm |
| Warranty | 18 months |