The TM5SBET1 is the transmitter electronic module of the Modicon TM5 system. It carries the TM5 data bus out of the controller rack and over a cable to a remote island, so the I/O can be distributed away from the cabinet instead of being stacked next to the controller. It is declared compatible with the Modicon M258 logic controller and the Modicon LMC058 motion controller. Maximum bus length is 2500 m, and the maximum cable distance between the transmitter and its receiver is 100 m.
This reference is the electronic module only. A complete slice is built from three separate references: a bus base (TM5ACBM11 or TM5ACBM15, the version with address setting), this TM5SBET1 electronic module, and a terminal block (TM5ACTB06 with 6 pins or TM5ACTB12 with 12 pins). The module distributes no power: the 24 Vdc I/O power segment is integrated into the bus bases, not generated here. That is the point to check before ordering, because a customer expecting a powered bus head will not get one.
Current consumption is 25 mA at 24 V DC on the I/O segment and 100 mA at 5 V DC on the bus, with a power dissipation of 1.1 W. Three LEDs report the state of the slice: a green LED for the power supply, a red LED for the power supply, and a yellow LED for communication on the data bus. In the Schneider documentation the red LED distinguishes a low voltage on the 24 Vdc I/O power segment or on the TM5 power bus from a firmware fault, and the yellow LED shows whether traffic is actually running on the bus.
The slice is 12.5 mm wide, 99 mm high and 75 mm deep, with a white housing, and it clips onto a DIN rail. Degree of protection is IP20 and IP67 as stated in the data sheet. Operating ambient air temperature is 0 to 50 °C for vertical installation, 0 to 55 °C without derating and 0 to 60 °C with derating. Storage is -25 to 70 °C, relative humidity is 5 to 95 % without condensation, operating altitude is up to 2000 m and pollution degree is 2. Vibration resistance is 1 gn from 8.4 to 150 Hz and 3.5 mm from 5 to 8.4 Hz on the DIN rail, and shock resistance is 15 gn for 11 ms.
The module carries the CE marking, is declared to UL 508, IEC 61131-2, CSA C22.2 No 213 and CSA C22.2 No 142, and holds CULus, GOST-R, CSA and C-Tick certification. Net weight is 0.025 kg; one piece is packed in a 105 x 60 x 20 mm carton of 36 g, and 97 pieces ship in a 400 x 300 x 150 mm carton of 4 kg. Warranty is 18 months.
| Characteristic | Value |
|---|---|
| Range of product | Modicon TM5 |
| Product or component type | Remote transmitter module |
| Function | Transmits the TM5 data bus |
| Product compatibility | Logic controller; motion controller |
| Range compatibility | Modicon M258; Modicon LMC058 |
| Maximum bus length | 2500 m |
| Maximum cable distance, transmitter to receiver | 100 m |
| Power distribution | No |
| Current consumption | 25 mA at 24 V DC (I/O); 100 mA at 5 V DC (bus) |
| Power dissipation | 1.1 W |
| Local signalling | 1 green LED power supply; 1 red LED power supply; 1 yellow LED data bus communication |
| Housing colour | White |
| Dimensions (H x W x D) | 99 x 12.5 x 75 mm |
| Net weight | 0.025 kg |
| IP degree of protection | IP20; IP67 |
| Marking | CE |
| Product certifications | CULus; GOST-R; CSA; C-Tick |
| Standards | UL 508; IEC 61131-2; CSA C22.2 No 213; CSA C22.2 No 142 |
| Ambient air temperature for operation | 0...50 °C (vertical installation); 0...55 °C without derating; 0...60 °C with derating |
| Ambient air temperature for storage | −25...70 °C |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...2000 m |
| Pollution degree | 2 |
| Vibration resistance | 1 gn (f = 8.4...150 Hz) on DIN rail; 3.5 mm (f = 5...8.4 Hz) on DIN rail |
| Shock resistance | 15 gn for 11 ms |
| Packing unit weight | 36 g |
| Packing unit dimensions | 105 x 60 x 20 mm |
| Packing unit 2 | 97 pieces; 400 x 300 x 150 mm; 4 kg |
| Warranty | 18 months |