The TM2DMM8DRT is a discrete input/output module for the Modicon M238 logic controller. It adds four 24 V DC inputs and four relay outputs to a controller in a single housing, and is accepted by Twido and Advantys OTB configurations as well. The module clips onto a 35 mm DIN rail and connects to the controller through a detachable screw terminal block, so a mixed I/O point group can be added to an existing installation without changing the controller itself.
The four inputs are rated 24 V DC with a permissible voltage range of 20.4...28.8 V. Input logic is selectable as sink or source, so the same module works with positive logic (sourcing sensor outputs pulled to the common) and with negative logic, which is useful when sensors of different output types have to share one module. Input current is 7 mA and input impedance is 3.4 kΩ. Response time is 4 ms in state 0 and 4 ms in state 1, which suits pushbuttons, limit switches, float switches and standard proximity sensors rather than high-speed counting.
The four outputs are electromechanical relays with one normally open (1 NO) contact each, rated 2 A per channel and 7 A maximum per output common. Because the contacts are dry and isolated from the input side, the module can switch AC or DC loads directly: contactors, solenoid valves, small motors, indicator lamps and heating elements, without an external interposing relay. Contact resistance is 45 mΩ and the minimum switching current is 0.1 mA at 0.1 V DC, so the contacts are also suitable for low-level signals. Response time is 10 ms or less from state 0 to state 1 and 5 ms or less from state 1 to state 0. Mechanical life is 20 000 000 operations. Electrical life is 100 000 operations at 2 A / 240 V AC resistive, 2 A / 30 V DC resistive, 1 A / 240 V AC AC-15 (cos phi = 0.7), 0.5 A / 240 V AC AC-15 (cos phi = 0.35) and 1 A / 24 V DC DC-13 (L/R = 7 ms).
Isolation has to be read carefully on this reference: there is no isolation between the input and output channels themselves. The outputs are isolated from the internal logic at 2300 V for 1 minute and the inputs at 500 V for 1 minute, the input side and output side are isolated from each other at 1500 V for 1 minute, and the output channel groups are isolated from each other at 1500 V for 1 minute. Wiring is by one detachable screw terminal block, one connection point for the inputs and one for the outputs. Two external fuses are required by the wiring diagram: a 2 A fuse on each load circuit and a 7 A fuse on the supply. The diagram gives both wiring options, A for sink wiring (positive logic) and B for source wiring (negative logic).
Current consumption is 20 mA at 24 V DC and 25 mA at 5 V DC with all inputs and outputs in state 1. A single indicator block on the front reports the channel states. The module measures 90 mm in height, 42.9 mm in width and 70 mm in depth, the width being larger than the 27.3 mm of a standard single-slot TM2 module because of the combined input and output terminal layout; allow 42.9 mm per module when calculating DIN rail space, and note that the mounting clip projects 8.5 mm when released. Net weight is 0.095 kg. Each unit is packed in a 13 × 11 × 7.5 cm carton weighing 192 g, with a contractual warranty of 18 months.
| Characteristic | Value |
|---|---|
| Range of product | Modicon M238 logic controller |
| Product or component type | Discrete I/O module |
| Product compatibility | Twido, Advantys OTB |
| Discrete input number | 4 |
| Discrete input voltage | 24 V DC |
| Input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink or source |
| Discrete input current | 7 mA |
| Input impedance | 3.4 kΩ |
| Input response time | 4 ms in state 0 4 ms in state 1 |
| Discrete output number | 4 |
| Output type | Relay, 1 NO per channel |
| Rated current per channel | 2 A |
| Maximum current per output common | 7 A |
| Contact resistance | 45 mΩ |
| Minimum switching current | 0.1 mA at 0.1 V DC |
| Output response time | ≤ 10 ms from state 0 to state 1 ≤ 5 ms from state 1 to state 0 |
| Mechanical life | 20 000 000 operations |
| Electrical life | 100 000 operations at 2 A / 240 V AC resistive 100 000 operations at 2 A / 30 V DC resistive 100 000 operations at 1 A / 240 V AC AC-15 (cos phi = 0.7) 100 000 operations at 0.5 A / 240 V AC AC-15 (cos phi = 0.35) 100 000 operations at 1 A / 24 V DC DC-13 (L/R = 7 ms) |
| Isolation between channels | None |
| Insulation, output to internal logic | 2300 V for 1 minute |
| Insulation, input to internal logic | 500 V for 1 minute |
| Insulation, input to output | 1500 V for 1 minute |
| Insulation between output groups | 1500 V for 1 minute |
| Current consumption | 20 mA at 24 V DC, all I/O in state 1 25 mA at 5 V DC, all I/O in state 1 |
| Local signalling | 1 indicator block |
| Electrical connection | 1 detachable screw terminal block 1 connection point for inputs 1 connection point for outputs |
| External fusing required | 2 A fuse per load circuit 7 A fuse on the supply |
| Mounting support | 35 mm DIN rail |
| Height | 90 mm |
| Width | 42.9 mm |
| Depth | 70 mm |
| Net weight | 0.095 kg |
| Package size | 13 × 11 × 7.5 cm (L × W × H) |
| Package weight | 192 g |
| Contractual warranty | 18 months |
All values are taken from the Schneider Electric product datasheet for TM2DMM8DRT. The module is an I/O expansion for the Modicon M238 logic controller; it is not a stand-alone controller and requires the host controller to operate.