The TM218LDAE40DRPHN is a compact programmable logic controller of the Modicon M218 range. Controller, power supply and I/O are integrated in one housing that mounts directly on a panel or DIN rail, so no rack or separate power module is needed. It provides 40 discrete I/O: 24 discrete inputs and 16 discrete outputs split into 12 relay outputs and 4 transistor outputs. The reference itself carries the main configuration: 40 for the I/O count, the AE marking for the Ethernet version, and the combination of relay and transistor outputs that distinguishes it from the all-relay version TM218LDA40DRPHN.
The 24 discrete inputs operate at 24 V DC and accept voltage-input signals from pushbuttons, limit switches, proximity sensors and auxiliary contacts. Input impedance is 4700 Ohm on standard inputs and 2800 Ohm on the high-speed inputs, and the response time is 2 ms on and off. Up to four of these inputs can be configured as high-speed counters at 100 kHz, which is what makes the controller usable for encoder and flow-meter signals and not only for on/off detection.
Outputs are deliberately mixed. The 12 relay outputs switch both AC and DC loads, so contactors, solenoid valves and lamps on a 230 V AC circuit connect to them directly. The 4 transistor outputs are solid state and switch DC loads only; two of them can be configured as pulse outputs at 100 kHz for stepper or servo drives. Before wiring, confirm which channel group a load belongs to, because a 230 V AC load must never be connected to a transistor output.
Communication is built in and needs no additional module. There is one RJ45 Ethernet port supporting Modbus TCP/IP at 10/100 Mbit/s with automatic crossover detection, and two non-isolated RS-485 serial links supporting Modbus RTU: SL1 on an RJ45 connector and SL2 on screw terminals. This makes the controller able to act as a Modbus master towards drives and meters over RS-485 while serving data to a supervisory system or HMI over Ethernet at the same time.
The controller is supplied from 100 to 240 V AC, with an operating range of 85 to 264 V AC, and dissipates 34 W. An auxiliary 24 V DC supply is available for powering sensors, limited to 300 mA, with an output voltage window of 19.2 to 28.8 V DC and a maximum voltage drop of 1.5 V. Shielded cables between devices should not exceed 5 m.
Operating ambient temperature is 0 to 55 °C and storage temperature is −25 to 70 °C, with relative humidity up to 95 % without condensation. Protection degree is IP20, pollution degree is 2, and operating altitude is up to 2000 m (3000 m for storage). Resistance to vibration is 3.5 mm at 5 to 150 Hz and resistance to shock is 15 gn for 11 ms. The product carries the CE marking. One piece weighs 876.5 g packed in a 23.261 x 13.021 x 9.67 cm carton; nine cartons make one outer box of 30 x 30 x 40 cm at 8.3975 kg.
| Characteristic | Value |
|---|---|
| Range of product | Modicon M218 |
| Product or component type | Programmable logic controller |
| Number of discrete I/O | 40 |
| Number of discrete inputs | 24 voltage inputs (terminal) |
| Number of discrete outputs | 12 relay outputs + 4 transistor outputs |
| Discrete input voltage | 24 V DC |
| Discrete output type | Relay / transistor |
| Rated supply voltage [Us] | 100...240 V AC |
| Supply voltage limits | 85...264 V AC |
| Power dissipation in W | 34 W at 100...240 V AC |
| Input impedance | 4700 Ohm (standard input) / 2800 Ohm (high-speed input) |
| Response time | 2 ms on and off |
| Auxiliary 24 V DC output | 19.2...28.8 V DC, 300 mA max |
| Maximum voltage drop | < 1.5 V |
| Maximum cable distance between devices | Shielded cable: < 5 m |
| Communication ports | 1 x RJ45 Ethernet (Modbus TCP/IP, 10/100 Mbit/s); 2 x RS-485 non-isolated (Modbus RTU) |
| High-speed counter | Up to 4 inputs at 100 kHz |
| Pulse output | 2 transistor outputs configurable at 100 kHz |
| IP degree of protection | IP20 |
| Pollution degree | 2 |
| Ambient air temperature for operation | 0...55 °C |
| Ambient air temperature for storage | −25...70 °C |
| Relative humidity | 95 % without condensation |
| Operating altitude | 0...2000 m |
| Storage altitude | 0...3000 m |
| Resistance to vibrations | 3.5 mm at 5...150 Hz |
| Resistance to shocks | 15 gn for 11 ms |
| Product certifications | CE |
| Packing unit weight | 876.5 g |
| Packing unit dimensions | 23.261 x 13.021 x 9.67 cm |
| Outer carton | 9 pieces, 30 x 30 x 40 cm, 8.3975 kg |