The STBDDO3605K is a basic digital output kit of the Schneider Electric Modicon STB distributed I/O solution. The kit consists of the STBDDO3605 module, an STBXTS2100 6-terminal spring clamp connector, an STBXBA1000 base and an STBXTS1100 6-terminal screw type connector. Product applicability is the STBXBA1000 I/O base and the STBPDT3100/3105 power distribution module. Range compatibility covers Modicon M262 logic/motion controller, Modicon M580 and third party controllers.
Discrete output quantity is 6, with a discrete output voltage of 24 V DC for solid state outputs and a discrete output current of 250 mA. Discrete output logic is positive logic (source). Output voltage is 19.2...30 V DC and absolute maximum voltage is 56 V for 1.3 ms. Output response time is 550 us off to on and 900 us on to off, and maximum leakage current is 0.4 mA at 30 V DC in state 0.
Output protection types are a power protection integrated fuse on the PDM with a 5 A time lag, short-circuit protection, reverse polarity protection and thermal overload protection. Power type is power distribution module, with a typical consumption of 90 mA at 5 V DC. Electrical connection is screw terminal. Insulation between each channel and the bus is 1500 V for 1 minute, inrush current is 2.5 A for 0.5 ms, reset is manual or automatic for a COM fault, and overvoltage category is II. Local signalling is 1 green LED for module status (RDY) and 1 green LED per channel for channel status (OUT1 to OUT6).
Height is 128.3 mm, width is 13.9 mm and depth is 70 mm, with an overall depth of 95 mm including the terminal blocks as shown on the dimension drawing. Net weight is 0.114 kg. Packing unit 1 is 1 piece (PCE), 13.2 cm long, 8.0 cm wide and 2.7 cm high, with a packing weight of 137 g. Packing unit 2 holds 28 pieces in 40 x 30 x 15 cm for 4.282 kg.
IP degree of protection is IP20, marking is CE, product certifications are UL, CSA and FM class 1 division 2, and the standard is IEC 61131-2. Ambient air temperature for operation is 0...60 °C without derating and for storage -40...85 °C without derating. Relative humidity is 95 % at 60 °C without condensation, operating altitude is up to 2000 m and pollution degree is 2. Vibration resistance is 3 gn (58...150 Hz) on a 35 x 7.5 mm symmetrical DIN rail and 5 gn (58...150 Hz) on a 35 x 15 mm symmetrical DIN rail, plus +/-0.35 mm (10...58 Hz); shock resistance is 30 gn for 11 ms according to IEC 88 reference 2-27. Warranty is 18 months.
| Characteristic | Value |
|---|---|
| Brand | Schneider Electric |
| Range of product | Modicon STB distributed I/O solution |
| Product or component type | Basic digital output kit |
| Kit composition | STBDDO3605 module; STBXTS2100 6-terminal spring clamp connector; STBXBA1000 base; STBXTS1100 6-terminal screw type connector |
| Product applicability | I/O base STBXBA1000; power distribution module STBPDT3100/3105 |
| Range compatibility | Modicon M262 logic/motion controller; Modicon M580; third party |
| Product application | Industrial use |
| Number of discrete outputs | 6 |
| Discrete output voltage | 24 V DC, solid state |
| Discrete output logic | Positive logic (source) |
| Discrete output current | 250 mA |
| Output voltage | 19.2...30 V DC |
| Absolute maximum voltage | 56 V for 1.3 ms |
| Output response time | 550 us off to on; 900 us on to off |
| Maximum leakage current | 0.4 mA at 30 V DC in state 0 |
| Output protection type | Integrated fuse on PDM, time lag 5 A; short-circuit protection; reverse polarity protection; thermal overload protection |
| Power type | Power distribution module |
| Typical consumption | 90 mA at 5 V DC |
| Electrical connection | Screw terminal |
| Insulation between each channel and bus | 1500 V for 1 minute |
| Inrush current | 2.5 A for 0.5 ms |
| Reset | Manual or automatic reset for COM fault |
| Overvoltage category | II |
| Local signalling | 1 green LED for module status (RDY); 1 green LED per channel (OUT1 to OUT6) |
| Height | 128.3 mm |
| Width | 13.9 mm |
| Depth | 70 mm (95 mm including terminal blocks) |
| Net weight | 0.114 kg |
| IP degree of protection | IP20 |
| Marking | CE |
| Product certifications | UL; CSA; FM class 1 division 2 |
| Standard | IEC 61131-2 |
| Ambient air temperature for operation | 0...60 °C without derating |
| Ambient air temperature for storage | -40...85 °C without derating |
| Relative humidity | 95 % at 60 °C without condensation |
| Operating altitude | <= 2000 m |
| Pollution degree | 2 |
| Vibration resistance | 3 gn (58...150 Hz) on 35 x 7.5 mm DIN rail; 5 gn (58...150 Hz) on 35 x 15 mm DIN rail; +/-0.35 mm (10...58 Hz) |
| Shock resistance | 30 gn for 11 ms, IEC 88 reference 2-27 |
| Packing unit 1 type | PCE |
| Packing unit 1 quantity | 1 |
| Packing unit 1 length | 13.200 cm |
| Packing unit 1 width | 8.000 cm |
| Packing unit 1 height | 2.700 cm |
| Packing weight | 137.000 g |
| Packing unit 2 | S02, 28 pieces, 40 x 30 x 15 cm, 4.282 kg |
| EU RoHS directive | Compliant with exemption |
| China RoHS | China RoHS declaration |
| Recycled cardboard packaging | No |
| Plastic-free packaging | No |
| Warranty | 18 months |