The 170INT11000 is an Interbus communication adaptor for the Modicon Momentum automation platform. It clips onto a Momentum I/O base and turns that I/O station into a node on an Interbus segment, so the discrete and analogue modules on the base can be addressed from the host controller over the fieldbus instead of being wired back to the cabinet. Power is taken from the I/O base, which means the adaptor needs no separate supply terminal of its own.
Communication uses the Interbus generation SUPI 2 protocol over shielded twisted pair at a fixed 500 kbit/s, in a ring topology with continuous shift register and master/slave access. One segment carries 0 to 254 devices. Total cable length may reach 12 800 m, with a maximum of 400 m between two adjacent modules. Data integrity is checked by a CRC-16 control parameter, and the adaptor enters a fail-safe state if the bus link is lost.
The bus is wired through two 9-pin D-sub ports, one for the incoming and one for the outgoing segment, so modules are simply daisy-chained around the ring without an external repeater. The housing is rated IP20 and is intended for mounting inside a control cabinet. Status of the link is reported locally through the front indicators.
Ambient air temperature for operation is 0…60 °C, with storage from -40…85 °C. Resistance to electrostatic discharge is 4 kV by contact and 8 kV on air to IEC 801-2, and resistance to electromagnetic fields is 10 V/m over 80…1000 MHz to IEC 801-3. The unit is CE marked and certified UL, CSA and FM Class 1 Division 2, with protective treatment TC for the board.
The adaptor cannot be used on its own: it must be fitted to a Momentum I/O base, either a discrete or an analogue base of the 170 series, to form a complete remote I/O station. Net weight is 0.07 kg; the single-unit package measures 259 × 178 × 56 mm.
| Characteristic | Value |
|---|---|
| Range of product | Modicon Momentum automation platform |
| Product or component type | Interbus communication adaptor |
| Communication port protocol | Interbus generation SUPI 2 |
| Method of access | Continuous shift register, Master/Slave |
| Transmission rate | 500 kbit/s |
| Transmission support medium | Twisted pair |
| Topology | Ring |
| Number of devices | 0...254 |
| Cable length | ≤ 12 800 m total ≤ 400 m between two modules |
| Control parameter | CRC-16 |
| Fail state | Fail safe |
| Supply | From I/O base |
| Bus connection | 2 × 9-pin D-sub (IN / OUT) |
| IP degree of protection | IP20 |
| Protective treatment | TC |
| Marking | CE |
| Product certifications | UL, CSA, FM Class 1 Division 2 |
| Resistance to electrostatic discharge | 4 kV contact, 8 kV on air (IEC 801-2) |
| Resistance to electromagnetic fields | 10 V/m, 80...1000 MHz (IEC 801-3) |
| Ambient air temperature for operation | 0...60 °C |
| Ambient air temperature for storage | -40...85 °C |
| Net weight | 0.07 kg |
| Package size | 259 × 178 × 56 mm (Depth × Width × Height) |
Specification values are taken from the Schneider Electric product data for 170INT11000. The adaptor requires a Modicon Momentum I/O base and is not a stand-alone module.