Welcome to Dongguan Gexu Automation Equipment Co., Ltd

ALL CATEGORIES

170FNT11001 - Fipio Communication Adaptor, 1 Mbit/s, Bus Manager

Product type: Fipio communication adaptor  |  Range: Modicon Momentum  |  Protocol: Fipio, 1 Mbit/s  |  Role: Bus manager for Premium PLC  |  Medium: Optical fibre 50/125, 62.5/125, shielded twisted pair  |  Supply: From the I/O base

The 170FNT11001 is a Fipio communication adaptor for the Modicon Momentum automation platform. It is an adaptor, not a complete station: it clips onto the top of a Momentum I/O base, discrete or analogue, and turns that base into a remote I/O station on a Fipio network. The field wiring stays on the base below it, so replacing or changing the adaptor does not disturb the terminals. On the network side the adaptor acts as bus manager for a Premium PLC, which is the role that decides how the station is configured and addressed.

Fipio runs at a fixed 1 Mbit/s and uses the producer/consumer access principle, so one station publishes data that several consumers can take at the same time rather than polling each node in turn. A single segment carries 0 to 31 devices without a repeater; with repeaters the same segment extends to 0 to 97 devices. Cable length between devices runs from 1000 to 5000 m depending on the medium, and the topology is extension or tap-off cable, which is what makes Fipio practical for distributing I/O along a long machine or a conveyor line.

Three transmission media are supported: 50/125 optical fibre, 62.5/125 optical fibre and shielded twisted pairs cable. Fibre is the choice where the run crosses a high-interference area such as a welding cell or a motor control centre, or where the distance exceeds what copper handles cleanly; shielded twisted pair is used for shorter runs inside a cabinet or along a single machine section. Both fibre sizes are accepted by the same adaptor, so the medium is decided by the cable and the connectors on site, not by a different reference.

Behaviour on a communication fault is configurable, which matters on a moving machine: the outputs can maintain their last value, fall back to zero, be forced to state zero, or be set to full scale. Choose the option that matches the safe state of the process rather than the default, because maintaining a value on a conveyor or a drive is not the same decision as dropping it. Three LEDs on the front give the diagnosis without a terminal: green RUN for module powered up or in service, red ERR for fault state, yellow COM for receive or send activity.

Power comes from the I/O base it is fitted to; the adaptor has no separate supply terminal of its own, so a station that stays dark is a base supply or base seating problem, not an adaptor fault. The product carries the TC protective treatment, is CE marked and certified UL and CSA. Operating ambient temperature is 0 to 60 °C, storage temperature is −40 to 85 °C, relative humidity is 95 % without condensation, and operating altitude goes up to 5000 m. Resistance to electrostatic discharge is 4 kV by contact and 8 kV on air to IEC 801-2; resistance to electromagnetic fields is 10 V/m over 80...1000 MHz to IEC 801-3. Net weight is 0.11 kg; one piece is packed in a 260 x 180 x 55 mm carton of 0.185 kg. Note that this is the Fipio adaptor - the InterBus adaptor of the same platform is a different reference, and the two are not interchangeable.

Specifications

Characteristic Value
Range of product Modicon Momentum automation platform
Product or component type Fipio communication adaptor
Product specific application Bus manager PLC Premium
Structure type Open industrial support conforming to FIP standard
Communication port protocol Fipio
Method of access Producer/consumer principle
Transmission rate 1 Mbit/s
Transmission support medium Optical fibre 50/125, optical fibre 62.5/125, twisted shielded pairs cable
Topology Extension or tap off cable
Number of devices 0...31 per segment without repeater, 0...97 with repeater
Cable length 1000...5000 m
Fail state Fallback to zero, forcing to state zero, full scale value, maintain value
Supply From I/O base
Local signalling 1 LED green RUN, 1 LED red ERR, 1 LED yellow COM
Marking CE
Product certifications CE, CSA, UL
Protective treatment TC
Resistance to electrostatic discharge 4 kV contact, 8 kV on air, IEC 801-2
Resistance to electromagnetic fields 10 V/m, 80...1000 MHz, IEC 801-3
Ambient air temperature for operation 0...60 °C
Ambient air temperature for storage −40...85 °C
Relative humidity 95 % without condensation
Operating altitude Up to 5000 m
Country of origin France
Net weight 0.11 kg
Packing unit weight 0.185 kg
Packing unit dimensions 260 x 180 x 55 mm
Warranty 18 months
Translation missing: en.general.search.loading