Welcome to Dongguan Gexu Automation Equipment Co., Ltd

ALL CATEGORIES

140DDI84100C - Coated Discrete Input Module, 16 Inputs, 10-60 V DC, Modicon Quantum

Product type: DC discrete input module  |  Range: Modicon Quantum  |  Protective treatment: conformal coating Humiseal 1A33  |  Number of discrete inputs: 16  |  Input voltage limits: 10...60 V DC  |  Absolute maximum input voltage: 75 V  |  Response time: 4 ms  |  Bus current requirement: 200 mA

The 140DDI84100C is the conformal-coated version of the 16-point DC discrete input module of the Modicon Quantum range. The electrical specification is the same as the standard reference: 16 discrete inputs, input voltage limits of 10 to 60 V DC, an absolute maximum input voltage of 75 V, a channel configuration of 8, one input word of addressing and standard module classification. The difference is stated in the protective treatment field: Humiseal 1A33 conformal coating, which is what the reference is specified for where the standard version is not.

The conformal coating is a thin protective film applied over the assembled board, covering the solder joints and component leads. It is the reason this reference is positioned as a coated product for harsh environments: it protects the board against moisture, salt mist, mould and corrosive gases that attack uncoated joints in service. On a panel where the standard reference is adequate, this version adds nothing electrically; on a panel where the atmosphere attacks the board, the standard reference is the wrong choice.

Thresholds are specified per voltage class rather than as a single percentage. At 12 V the guaranteed state 1 is 9 to 12 V and state 0 is 0 to 1.8 V; at 24 V, 11 to 24 V and 0 to 5 V; at 48 V, 34 to 48 V and 0 to 10 V; at 60 V, 45 to 60 V and 0 to 9 V. Input current at nominal voltage is 5 to 10 mA at 12 V, 6 to 30 mA at 24 V, 2 to 15 mA at 48 V and 1 to 5 mA at 60 V. The logic input is positive.

Response time is 4 ms from state 0 to 1 and 4 ms from state 1 to 0, and the maximum switching frequency is 100 Hz. Isolation between each group and the bus is 2500 Vrms for one minute, and isolation between groups is 700 Vrms for one minute. The bus current requirement is 200 mA. Power dissipation is 1 W plus 0.62 W for each point that is on, so the figure to use depends on how many inputs are energised.

Local signalling is one green LED for bus communication activity, one red LED for a detected external fault, and 16 green LEDs for input status. The module carries the CE marking, is declared to CSA C22.2 No 142 and UL 508, and holds FM Class I Division 2 and C-Tick certification. Electrostatic discharge immunity is 4 kV on contact and 8 kV in air to IEC 801-2, and electromagnetic field immunity is 10 V/m from 80 to 2000 MHz to IEC 801-3.

The module is IP20 and is intended for mounting inside an enclosure. Operating ambient air temperature is 0 to 60 °C, storage is -40 to 85 °C, relative humidity is 95 % without condensation, and operating altitude is up to 5000 m. Body dimensions are 290 mm high, 40.3 mm wide and 104 mm deep, or 144 mm deep with the field terminal block fitted. Net weight is 0.3 kg; one piece ships in a 312 x 45 x 163 mm carton of 468 g. Warranty is 18 months.

Specifications

Characteristic Value
Range of product Modicon Quantum
Product or component type DC discrete input module
Protective treatment Conformal coating Humiseal 1A33 (coated product for harsh environments)
Number of discrete inputs 16
Channel configuration 8
Logic input Positive logic
Input voltage limits 10...60 V DC
Absolute maximum input voltage 75 V
Input current at 12 V 5...10 mA
Input current at 24 V 6...30 mA
Input current at 48 V 2...15 mA
Input current at 60 V 1...5 mA
Guaranteed state 1 9...12 V (12 V ±5 %); 11...24 V (24 V ±20 %); 34...48 V (48 V ±20 %); 45...60 V (60 V ±20 %)
Guaranteed state 0 0...1.8 V (12 V ±5 %); 0...5 V (24 V ±20 %); 0...10 V (48 V ±20 %); 0...9 V (60 V ±20 %)
Response time 4 ms state 0 to 1; 4 ms state 1 to 0
Switching frequency ≤ 100 Hz
Address requirement 1 input word
Isolation, group to bus 2500 Vrms for 1 minute
Isolation, group to group 700 Vrms for 1 minute
Power dissipation 1 W + (0.62 W x number of points on)
Bus current requirement 200 mA
Local signalling 1 green LED bus activity; 1 red LED external fault (F); 16 green LEDs input status
Module classification Standard
Marking CE
Standards CSA C22.2 No 142; UL 508
Product certifications FM Class I Division 2; C-Tick
Electrostatic discharge immunity 4 kV contact, 8 kV air, per IEC 801-2
Electromagnetic field immunity 10 V/m, 80...2000 MHz, per IEC 801-3
Dimensions (H x W x D) 290 x 40.3 x 104 mm (144 mm with field terminal block)
Degree of protection IP20
Ambient air temperature for operation 0...60 °C
Ambient air temperature for storage −40...85 °C
Relative humidity 95 % without condensation
Operating altitude ≤ 5000 m
Net weight 0.3 kg
Packing unit weight 468 g
Packing unit dimensions 312 x 45 x 163 mm
Warranty 18 months
Translation missing: en.general.search.loading