The 140DDI84100 is a DC discrete input module of the Modicon Quantum range. It provides 16 discrete inputs with input voltage limits of 10 to 60 V DC and an absolute maximum input voltage of 75 V. The channel configuration is 8. Addressing requires one input word and the module classification is standard.
Thresholds are specified per voltage class rather than as a single percentage. At 12 V the guaranteed state 1 is 9 to 12 V and state 0 is 0 to 1.8 V; at 24 V, 11 to 24 V and 0 to 5 V; at 48 V, 34 to 48 V and 0 to 10 V; at 60 V, 45 to 60 V and 0 to 9 V. Input current at nominal voltage is 5 to 10 mA at 12 V, 6 to 30 mA at 24 V, 2 to 15 mA at 48 V and 1 to 5 mA at 60 V. The logic input is positive.
Response time is 4 ms from state 0 to 1 and 4 ms from state 1 to 0, and the maximum switching frequency is 100 Hz. Isolation between each group and the bus is 2500 Vrms for one minute, and isolation between groups is 700 Vrms for one minute. The bus current requirement is 200 mA. Power dissipation is 1 W plus 0.62 W for each point that is on, so the figure to use depends on how many inputs are energised.
Local signalling is one green LED for bus communication activity, one red LED for a detected external fault, and 16 green LEDs for input status. The module carries the CE marking, is declared to UL 508 and CSA C22.2 No 142, and holds FM Class I Division 2 and C-Tick certification. Electrostatic discharge immunity is 4 kV on contact and 8 kV in air to IEC 801-2, and electromagnetic field immunity is 10 V/m from 80 to 2000 MHz to IEC 801-3.
The module is IP20 and is intended for mounting inside an enclosure. Operating ambient air temperature is 0 to 60 °C, storage is -40 to 85 °C, relative humidity is 95 % without condensation, and operating altitude is up to 5000 m. Body dimensions are 290 mm high, 40.3 mm wide and 104 mm deep, or 144 mm deep with the field terminal block fitted. Net weight is 0.3 kg; one piece ships in a 312 x 166 x 46 mm carton of 0.44 kg. Warranty is 18 months.
| Characteristic | Value |
|---|---|
| Range of product | Modicon Quantum |
| Product or component type | DC discrete input module |
| Number of discrete inputs | 16 |
| Channel configuration | 8 |
| Logic input | Positive logic |
| Input voltage limits | 10...60 V DC |
| Absolute maximum input voltage | 75 V |
| Input current at 12 V | 5...10 mA |
| Input current at 24 V | 6...30 mA |
| Input current at 48 V | 2...15 mA |
| Input current at 60 V | 1...5 mA |
| Guaranteed state 1 | 9...12 V (12 V ±5 %); 11...24 V (24 V ±20 %); 34...48 V (48 V ±20 %); 45...60 V (60 V ±20 %) |
| Guaranteed state 0 | 0...1.8 V (12 V ±5 %); 0...5 V (24 V ±20 %); 0...10 V (48 V ±20 %); 0...9 V (60 V ±20 %) |
| Response time | 4 ms state 0 to 1; 4 ms state 1 to 0 |
| Switching frequency | ≤ 100 Hz |
| Address requirement | 1 input word |
| Isolation, group to bus | 2500 Vrms for 1 minute |
| Isolation, group to group | 700 Vrms for 1 minute |
| Power dissipation | 1 W + (0.62 W x number of points on) |
| Bus current requirement | 200 mA |
| Local signalling | 1 green LED bus activity; 1 red LED external fault (F); 16 green LEDs input status |
| Module classification | Standard |
| Marking | CE |
| Standards | UL 508; CSA C22.2 No 142 |
| Product certifications | FM Class I Division 2; C-Tick |
| Electrostatic discharge immunity | 4 kV contact, 8 kV air, per IEC 801-2 |
| Electromagnetic field immunity | 10 V/m, 80...2000 MHz, per IEC 801-3 |
| Dimensions (H x W x D) | 290 x 40.3 x 104 mm (144 mm with field terminal block) |
| Degree of protection | IP20 |
| Ambient air temperature for operation | 0...60 °C |
| Ambient air temperature for storage | −40...85 °C |
| Relative humidity | 95 % without condensation |
| Operating altitude | ≤ 5000 m |
| Net weight | 0.3 kg |
| Packing unit weight | 0.44 kg |
| Packing unit dimensions | 312 x 166 x 46 mm |
| Warranty | 18 months |