The Allen-Bradley 22D-B024H204 PowerFlex 40P Adjustable Frequency AC Drive is part of the Allen-Bradley PowerFlex 40P Drive Family that provides exceptional motor control in applications requiring closed-loop control and category 3 Safe-off feature. It is used for providing cost-effective solutions for industrial applications with a need for speed control, and it features digitally-controlled operations which allow for precision and repetition. The 22D-B024H204 has a 3-phase operating voltage range of 200 to 240 Volts AC, with an output current of 24 Amps, and a drive power rating of 5.5 kW (7.5 Horsepower). Its input tolerance range is -10% to +10% at 48 to 63 Hertz, with a real input power rating of 11.8KVA at 26.1 Amps input current, and its maximum short-circuit rating is 100,000 Amps. The 22D-B024H204 has a displacement power factor of 0.98 across the entire speed range, and it provides BUS overvoltage and under voltage trips of 405 and 210 Volts DC, respectively. It is designed to faultlessly ride through 100 milliseconds of power loss, and it has a standard Logic ride-thru time of 2 seconds. The 22D-B024H204 provides Class 10 Electronic Motor Overload Protection, with a microprocessor-monitored overcurrent trip with 200% of the rated output limit, and it has a removable Metal Oxide Varistor, that provides Ground Fault protection and phase-to-phase protection at the drive’s output. It provides motor control by using the standard volt per hertz and the sensorless vector control, and it provides output control by using sine coded pulse width modulated signal with a programmable carrier range of 2 to 16 KHz.

Its programmable output frequency range is 0 to 500 Hertz, with an adjustable output voltage range of 0 to the rated motor voltage, and it has a digital control input accuracy within ±0.05% of the set output frequency, and an Analog control input accuracy within 0.5% of the maximum output frequency. The 22D-B024H204 has a performance range of ±1% of the base speed across an 80: 1-speed range, with 97.5% control efficiency, and it features 4 separate and programmable acceleration and deceleration times, each programmable from 0 to 600 seconds in 0.1-second increments. It offers multiple stop modes (Ramp, Coast, DC-Brake, and Ramp-to-Stop), and it provides an overload capacity of 150% of rated output for 60 seconds and 200% for 3 seconds. It has 7 digital (2 dedicated and 5 programmable) inputs, with 24 Volts DC sink/source control selectable via a DIP switch, with two 10-bit voltage or current analog inputs, and it has 1 programmable Form C Relay output, and 1 non-isolated voltage or current analog output. The 22D-B024H204 has an integral LCD and reset buttons, which allows the users to change the display parameters and reset the drive in the case of failure, and it also has an integral RS-485 serial communication port, which allows for multi-drop network configuration, and for programming by a PC. It has a working temperature range of 14 to 122 degrees Fahrenheit at 5 to 95% non-condensing relative humidity range, and it has a storage temperature range of –40 to 185 degrees Fahrenheit. The 22D-B024H204 is built to withstand a 15G operational shock for 11ms, with 1G peak vibration at 5 to 2000 Hertz, and it is built for installation at a maximum altitude of 1000 meters without de-rating. It is a plate mounted drive with IP20 Open Enclosure, with total dimensions of 155 x 284 x 98.5 millimeters, and it is CE and cUL-us certified.