The 2094-AL25S module is a line interface module manufactured by Allen-Bradley/Rockwell Automation as part of the Kinetix 6000 series. This module belongs to the 200 Volts voltage class and it has a frequency range of 50 to 60 Hertz with a current rating of 25 Amps. It has an auxiliary power output of 230 Volts AC and a configurable branch circuit protection voltage rating of 24 Volts DC at 20 Amps. Some of the notable features of the 2094-AL25S line interface module include a DC line filter, mounting bracket compatibility, branch circuit protection, power to multiple power rails, and configurable branch circuit protection. The users can externally supply the AC line filter, and the module also features an auxiliary or control power line filter. Other specifications of this line interface module include an input voltage range of 195 to 265 Volts RMS and a 3-phase nominal voltage rating of 230 Volts. This module operates in the AC frequency range of 47 to 63 Hertz.

The Allen-Bradley 2094-AL25S module and the other modules in the Bulletin 2094 product line of Line Interface Module (LIM) are specially designed and intended to replace the numerous common input power devices that are normally needed for the servo drive system to operate. Through the use of a line interface module, the operators can save the panel installation space and decrease the volume of wiring that is needed when compared to the traditional setup with single modules that must all be mounted and powered separately. When the 2094-AL25S line interface module is used in the system and when it is correctly mounted to the right side of the host drive with an AC (EMC) line filter also mounted behind it, then the line interface module helps to establish the noise zones around the drive.