The 1606-XLP95E power supply is an Allen-Bradley switched-mode power supply. It is part of the 1606 series of power supplies from Allen-Bradley/Rockwell Automation. The device is equipped with a switching regulator which can convert input electrical power in an efficient manner. It is often referred to as an SMPS device. This device is more efficient than regulated linear power supplies. It is a cost-effective power solution because it uses very small transformers. The device has a compact build and it can be used in small cabinet locations. The 1606-XLP95E power supply is used in a wide variety of electronics and appliances. The SMPS unit has an operating range between 200 and 240 Volts AC. It comes with a rated power output of 100 Watts. The terminals of the power supply have a screw/spring clamp. The rated output current of the device is 4.2 Amps. It comes with the DC-OK signal and the output voltage of the device is adjustable. The heat generation is minimized in this power supply. It provides a smaller and cost-effective solution for low power applications.

The 1606-XLP95E power supply controls the switching and samples the output voltage to provide feedback. The device should not be exposed to hazardous locations. The device is certified with global industrial safety standards, including the CE. The device can be mounted and connected to other devices easily. The 1606-XLP95E power supply has an enhanced overload design which does not switch off at an overload of up to 1.9 times the nominal current level. The device is 90% efficient and it has a hold-up time of less than 40 milliseconds for 240 Volts AC voltage. The device has a shutdown input function which is used for turning it on and off by using the logic signal for remote monitoring.