The VPL-B1003F-CJ12AA from Allen-Bradley is a brushless AC servo motor. The rated speed of the VPL-B1003F-CJ12AA is 4500 RPM and it is designed for 480 Volts AC input power. The rotor inertia is 0.00012 kg-m2. The output of the motor is rated at 1.65 kW (2.21 Horsepower) with a peak and continuous torque at 11.15 and 4.18 N-m, respectively. The weight of the motor is approximately 4.45 kilograms. The VPL-B1003F-CJ12AA connects to a drive through a SpeedTec Right Angle DIN Connector (325 degrees rotatable). The bolt circle diameter (frame size) is 100 millimeters. It is equipped with an 18-bit single-turn digital high-resolution encoder that is capable of providing feedback within 1 turn. The motor has 3 magnet stacks and the F type winding. It is equipped with a keyed shaft but it does not include a holding brake.

The VPL-B1003F-CJ12AA belongs to the Kinetix VP Low-Inertia Motors series from Allen-Bradley, that is compatible with the Kinetix 5700 inverters and Kinetix 5500 drives. The VP low-inertia motors include a digital feedback device for providing real-time performance information to the control system. A single-cable motor-to-drive design simplifies the installation process. The options that are available include a 24 Volts DC brake, a keyed or keyless shaft, and a single-turn or multi-turn encoder. The VP low-inertia motors are ideally suited to packaging, automotive, material handling, and electronic assembly applications. The inspection of the motor for defects and damage is recommended before installation. To ensure long-term reliable performance, the motor and seals should be inspected for damage or wear on a regular basis and shields should be used for the motor housing, the seals, and the motor shaft to protect them from foreign fluids or foreign matter.

The Allen-Bradley VPL series servo motor with catalog number VPL-B1003F-CJ12AA is a 400 Volt class Brushless AC synchronous motor that utilizes a digital encoder to act as a feedback device to control and monitor the position of the driven load based on the relative rotary motion of the motor. The VPL series boasts of high torque to size ratio and delivers low rotor inertia.

The VPL-B1003F-CJ12AA is designed with high energy rare-earth magnets that significantly improve the production of torque, inertia, and braking of the motor. This servo motor is especially optimized for use with the Kinetix 5500 and Kinetix 5700 Dual Axis inverters. Additionally, the built-in encoder to this servo motor is an 18-bit absolute single-turn digital encoder that is capable of Hiperface DSL protocol for fast communication between drive and servo motor for fast response.

The VPL-B1003F-CJ12AA operates at an input supply voltage of 480 Volts AC, 47-63 Hertz. It delivers an output power of 1.65 Kilowatts or 2.21 Horsepower with an inertia output of 0.00012 kg-m2 (0.0010 lb•in•s2). Additionally, it has a continuous stall torque of 4.18 Newton-meters or 37.0 lb-in, a peak stall torque of 11.15 Newton-meters, or 99.0 lb-in. This motor weighs 4.45 Kilograms or 9.80 Pounds.

The VPL-B1003F-CJ12AA supports the installation of optional components such as 24 Volt DC holding brake and SIL2 rated encoders such as 23-bit resolution or 18-bit resolution multi-turn encoders. Though the VPL-B1003F-CJ12AA already uses the SpeedTec cable connectors, it may also be used with the Kinetix 2090 Single cable technology. Additionally, optional motor shaft seals may also be purchased separately for additional protection and to increase protection rating.