The 2090-XXNPMP-16S40 cable is a Kinetix power cable from the 2090 series by Allen-Bradley. It is a standard non-flex cable with a conductor size of 14 AWG. The 2090 power cables like this one are manufactured with 2 connector ends, and 1 end is the motor end which comes with a bayonet connector and the other end is a drive end with a flying lead on it. The total length of the power cable is 40 meters and it is enclosed inside a black jacket. The outer jacket is made up of industrial-grade TPE material. The 2090-XXNPMP-16S40 cable can serve a voltage of up to 600 Volts for normal usage. The cable is registered with the UL standards to meet the AWM requirements. The cable has been designed to connect the parts of a motion control system. The power cable supplies 3-phase power to the MP series low-inertia servo motor drive and an integrated gear system with a voltage rating of 230 or 460 Volts.

The 2090-XXNPMP-16S40 power cable is fully compatible with modern Allen-Bradley servo motor drives with bayonet connectors. The bayonet connector in the 2090-XXNPMP-16S40 cable is connected with the bayonet receptable on the power transition cable to extend the power cable. The cable should be grounded at some point for earthing to prevent electrical problems and accidents. The drive should be fully disconnected from the power before the cable connections are made. The cables experience arcing when technicians try to connect to the drive without disconnecting the power first. The 2090-XXNPMP-16S40 cable comes with 4 wires. It is recommended to trim the unused power wires. The cable should not be exposed to heat-generating devices and equipment.