{"product_id":"schneider-stbddi3725kc-basic-digital-input-kit-16-di-24v-dc","title":"Schneider STBDDI3725KC Basic Digital Input Kit 16 DI 24V DC","description":"\u003ch2\u003eSTBDDI3725KC - Modicon STB Basic Digital Input Kit, 16 DI 24 V DC, Spring Clamp Connector\u003c\/h2\u003e\n\n\u003cp\u003eProduct type: \u003cstrong\u003eBasic Digital Input Kit\u003c\/strong\u003e  |  Range: \u003cstrong\u003eModicon STB\u003c\/strong\u003e  |  Inputs: \u003cstrong\u003e16 DI, 24 V DC, positive logic (sink)\u003c\/strong\u003e  |  Connection: \u003cstrong\u003espring clamp\u003c\/strong\u003e  |  Kit: \u003cstrong\u003emodule + base + 18-terminal connector\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe STBDDI3725KC is a basic digital input kit of the Modicon STB distributed I\/O range. It is supplied complete: the STBDDI3725 input module, the STBXBA3000 I\/O base and the STBXTS2180 18-terminal spring clamp connector. The module carries 16 discrete inputs at a nominal 24 V DC with positive logic, so it sinks current from the sensor and is wired for NPN type sensors. As a basic module it comes with the factory-set default configuration and needs no configuration software: it is plugged onto the base, the island is given a network interface module, and the inputs are available to the fieldbus master.\u003c\/p\u003e\n\n\u003cp\u003eThe 16 channels are split over two 18-terminal spring clamp connectors, IN1 to IN8 on the left block and IN9 to IN16 on the right block, so field wiring can be removed block by block without touching the module. Inputs accept 2-wire or 3-wire sensors. In the 3-wire arrangement the sensor supply is taken from the connector itself: the pins alternate between sensor supply group (+) and input, and pin 9 and pin 18 carry the sensor supply negative (PDM-) for the 3-wire sensors. There are four sensor supply groups in total, two per connector block. Sensor supply is fed by the power distribution module of the island, STBPDT3100 or STBPDT3105, and the module is used on the I\/O base STBXBA3000.\u003c\/p\u003e\n\n\u003cp\u003eThe input voltage range is 11 to 30 V in category 1 of IEC 61131-2, with the state 0 range at −3 to 5 V. Each channel draws 4.5 mA at 24 V DC. A state 1 is guaranteed between 15 and 30 V at 2.5 mA or more, a state 0 is guaranteed between −3 and 5 V at 1.5 mA or less. The input filter is 1 ms, response time is 2 ms from off to on and 2 ms from on to off. Inputs are protected by a resistor-limited input circuit and by reverse polarity protection. The module draws 100 mA at 5 V DC from the logic bus.\u003c\/p\u003e\n\n\u003cp\u003eStatus is visible on the front panel: one green RDY LED for the module state and one green LED per channel for the input state, IN1 to IN16. The module is 125 mm high, 28.1 mm wide and 65.1 mm deep, and it takes 28.1 mm of width on the 35 mm DIN rail once clipped on the base, so 16 input points occupy less width than two 8-channel slices. Net weight is 0.086 kg.\u003c\/p\u003e\n\n\u003cp\u003eOperating temperature is −25 to 70 °C without derating and storage temperature −40 to 85 °C without derating, relative humidity 95 % at 60 °C without condensation, operating altitude up to 2000 m and pollution degree 2. Vibration resistance is 3 gn and 5 gn from 58 to 150 Hz on the 35 mm DIN rail with 3.5 mm amplitude from 10 to 58 Hz, and shock resistance is 30 gn for 11 ms. Protection degree is IP20. The kit is marked CE and certified FM Class 1 Division 2, UL and CSA, and conforms to IEC 61131-2 type 3. One kit is packed in a 13 x 8 x 3.5 cm carton of 194 g, and the contractual warranty is 18 months.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote on the reference.\u003c\/strong\u003e This is the kit reference STBDDI3725\u003cstrong\u003eKC\u003c\/strong\u003e: it includes the mounting base and a spring clamp connector. The bare module STBDDI3725 is a different reference, it is delivered without base and without connector, and its connection is a screw terminal. Buyers who need screw terminals should not order this kit expecting them.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"7\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;border-color:#d8dee6;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" style=\"background:#0f5c8c;color:#ffffff;\"\u003eCharacteristic\u003c\/th\u003e\n\u003cth align=\"left\" style=\"background:#0f5c8c;color:#ffffff;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange of product\u003c\/td\u003e\n\u003ctd\u003eModicon STB distributed I\/O solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct or component type\u003c\/td\u003e\n\u003ctd\u003eBasic digital input kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit composition\u003c\/td\u003e\n\u003ctd\u003eSTBDDI3725 module, STBXBA3000 I\/O base, STBXTS2180 18-terminal spring clamp connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct compatibility\u003c\/td\u003e\n\u003ctd\u003eI\/O base STBXBA3000; power distribution module STBPDT3100 \/ STBPDT3105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiscrete input number\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiscrete input voltage\u003c\/td\u003e\n\u003ctd\u003e24 V DC nominal; 11...30 V (IEC 61131-2 category 1); −3...5 V state 0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiscrete input logic\u003c\/td\u003e\n\u003ctd\u003ePositive logic (sink)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiscrete input current\u003c\/td\u003e\n\u003ctd\u003e4.5 mA at 24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage state 1\u003c\/td\u003e\n\u003ctd\u003e15...30 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage state 0\u003c\/td\u003e\n\u003ctd\u003e−3...5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent state 1\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;= 2.5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent state 0\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;= 1.5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput filter\u003c\/td\u003e\n\u003ctd\u003e1 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse time\u003c\/td\u003e\n\u003ctd\u003e2 ms off to on, 2 ms on to off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput protection\u003c\/td\u003e\n\u003ctd\u003eResistor-limited input, reverse polarity protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor supply\u003c\/td\u003e\n\u003ctd\u003e4 groups, fed by the power distribution module; PDM− on pin 9 and pin 18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring mode\u003c\/td\u003e\n\u003ctd\u003e2-wire or 3-wire sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e2 x 18-terminal spring clamp connector: IN1-IN8 left, IN9-IN16 right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply type\u003c\/td\u003e\n\u003ctd\u003ePower distribution module (island PDM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e100 mA at 5 V DC, logic bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal signalling\u003c\/td\u003e\n\u003ctd\u003e1 RDY LED (green), 1 LED per channel (green)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule type\u003c\/td\u003e\n\u003ctd\u003eBasic, factory-set configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e35 mm DIN rail, on I\/O base STBXBA3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e125 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e28.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e65.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e0.086 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP degree of protection\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient air temperature for operation\u003c\/td\u003e\n\u003ctd\u003e−25...70 °C without derating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient air temperature for storage\u003c\/td\u003e\n\u003ctd\u003e−40...85 °C without derating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003e95 % at 60 °C without condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating altitude\u003c\/td\u003e\n\u003ctd\u003eUp to 2000 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePollution degree\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration resistance\u003c\/td\u003e\n\u003ctd\u003e3 gn and 5 gn, 58...150 Hz on 35 mm DIN rail; 3.5 mm, 10...58 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock resistance\u003c\/td\u003e\n\u003ctd\u003e30 gn, 11 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarking\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct certifications\u003c\/td\u003e\n\u003ctd\u003eFM Class 1 Division 2, UL, CSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eIEC 61131-2 type 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacking unit weight\u003c\/td\u003e\n\u003ctd\u003e194 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePacking unit dimensions\u003c\/td\u003e\n\u003ctd\u003e13 x 8 x 3.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e18 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"Schneider Electric","offers":[{"title":"Default Title","offer_id":68211640762456,"sku":null,"price":186.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0580\/2799\/9320\/files\/STBDDI3725KC.jpg?v=1794638036","url":"https:\/\/gexufein.com\/products\/schneider-stbddi3725kc-basic-digital-input-kit-16-di-24v-dc","provider":"Gexufein Automation","version":"1.0","type":"link"}