1734-IE2C | Allen-Bradley Analog Input Module
1734-IE2C | Allen-Bradley Analog Input Module
Technical Specifications for 1734-IE2C
Manufacturer | Rockwell Automation |
Module Location | 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS wiring base assembly |
Keyswitch position | 3 |
Enclosure type rating | None (open-style) |
Dimensions | 56 x 12 x 75.5 mm (2.2 x 0.47 x 2.97 in.) |
Power Dissipation | 0.6 W @ 28.8V DC |
Current Draw | 75 mA @5V dc |
Input update rate per module | 120 ms @ Notch = 50 Hz 100 ms @ Notch = 60 Hz (default) 24 ms @ Notch = 250 Hz 12 ms @ Notch = 500 Hz |
Input step response (per channel) | 80 ms @ Notch = 50 Hz 70 ms @ Notch = 60 Hz (default) 16 ms @ Notch = 250 Hz 8 ms @ Notch = 500 Hz |
Absolute Accuracy | 0.1% Full Scale @ 25 Deg. Celsius |
Output signal | 0-20 mA; 4-20 mA |
No. of outputs | Two (2) Single-ended, non-isolated channels |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1734-IE2C |
Series | POINT I/O |
Module Type | Analog Input Module |
Resolution | 16 bits – over 0...21 mA 0.32 μA/cnt |
Inputs | 2-Point |
Conversion Type | Delta Sigma |
Calibration | Factory Calibrated |
Max Overload | Fault Protected 28.8 Volts DC |
Enclosure Type | Open |
Data Format | Signed Integer |
Voltage | 10 to 28.8 Volts DC |
Current | 10 mA |
UPC | 10612598205230 |
About 1734-IE2C
This module weighs approximately 0.036 kilograms or 0.08 pounds. In addition, it has an open-style enclosure type rating and it has dimensions of 56 x 12 x 75.5 millimeters or 2.21 x 0.47 x 2.97 inches. The 1734-IE2C’s compact design makes installation easy and it can be mounted horizontally or vertically.
The 1734-IE2C POINT I/O current input analog module has 2 single-ended, non-isolated channels. It gives 16 bits across a 0 to 21 mA resolution. When mounting to a terminal base, position the key switch at 3. The 1734-IE2C is a 2-channel module that converts an analog input current to a digital value and reads a current input between 0 to 20 mA or 4 to 20 mA depending on the mode that is selected. The supported networks include ControlNet, DeviceNet, and EtherNet/IP. Moreover, the 1734-IE2C uses an external DC power supply rated at 10 to 28.8 Volts DC and 24 Volts DC nominal, and it uses a current with a 10 mA rating. The 1734-IE2C is rated to withstand 2550 Volts DC for 60 seconds and it has 50 Volts of continuous isolation voltage. It gives off a maximum power dissipation of 0.6 W at 28.8 Volts DC and a maximum thermal dissipation of 2.0 BTU/hour at 28.8 Volts DC.
The 1734-IE2C is basically an analog input card that requires a terminal base to function. Compatible terminal bases for use with this analog input module include 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS. This module support vertical and horizontal mounting and support mounting to a standard 35 mm DIN rail. When mounting the module to the appropriate terminal base, the module’s keyswitch must be positioned at position 3.
The 1732-IE2C has an internal Analog to Digital (ADC) converter which has a conversion resolution of 16 bits – over 0...21 mA 0.32 μA/cnt using Delta-Sigma conversion. Converted data is stored in Signed Integer format with absolute accuracy of 0.1% Full Scale @ 25 °C (77 °F) with accuracy drift of 30 ppm/°C.
The 1734-IE2C is compatible for use with any Allen-Bradley controller platform. Most especially, it is well suited with the Logix product family specifically, CompactLogix and ControlLogix controller platforms. This module supports a variety of communication adapters which enable the module to communicate to the master controller over a particular industrial protocol.
FAQ for 1734-IE2C
What do the indicators on the logic side of the 1734-IE2C Current/Voltage Input Analog Module mean?
On the back side of the 1734-IE2C there are one green/red module status indicator, one green/red network status indicator and two green/red input status indicators.
What mode does the 1734-IE2C module operate in?
The 1734-IE2C POINT Current/Voltage Input Analog Module operates in a unipolar mode.
What is the price of the 1734-IE2C POINT I/O 2 Current and 2 Voltage Input Analog Module?
Submit quote request, send us an email, or call 800-730-0292 for our best price.
Does DO Supply offer repair services for the 1734-IE2C POINT 2 Current and 2 Voltage Input Analog Module?
Yes, offers repair services for the 1734-IE2C. For more information or to request a repair quote, please contact us.
What kind of voltage does the 1734-IE2C use?
The 1734-IE2C uses DC voltage.
What kind of enclosure does the 1734-IE2C have?
The 1734-IE2C has an open type of enclosure.
How many input channels does the 1734-IE2C have?
The 1734-IE2C has Two (2) analog input channels.
What are compatible analog input signals to the 1734-IE2C?
Compatible analog input signals are 0-20 mA and 4-20 mA.
What is the converter type and resolution of the 1734-IE2C?
The 1734-IE2C has a Sigma Delta converter and has 16-bits resolution.
Technical Description of 1734-IE2C
The Allen-Bradley 1734-IE2C is a POINT I/O Analog Input Module. It has 2-Point Inputs and a Delta Sigma Conversion Type with an Open Enclosure Type. This Analog Input Module has a Resolution of 16 bits across 0 - 21 mA.